Waterproofing Membranes

 

HYDRO BAN®

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.

 

  • Meets and exceeds the requirements of AS4858 and AS4654.1 for a Class 3 Membrane
  • Does not require the use of fabric**
  • Bonds directly to metal and PVC plumbing fixtures only
  • Thin; only 0.5 mm – 0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* Refer to cautions section of data sheet for more information on curing

** For gaps 3 mm or less see TDS1003 for complete instructions

9235 Waterproofing Membrane

9235 Waterproofing Membrane is a thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.

9235 Waterproofing Membrane is accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements. When anti-fracture treatment is required in wet areas, 9235 Waterproofing Membrane provides the complete package. You only need one product to protect your floor from water damage and substrate cracks. Inhibits the growth of stain-causing mould and mildew in membranes with antimicrobial product protection. ASTM C627 Rated "Extra Heavy" Service.

Uses:

  • Swimming pools, fountains & water features
  • Shower pans, stalls and tub surrounds
  • Bathrooms & laundries (industrial, commercial & residential)
  • Spas & jacuzzis
  • Kitchens & food processing areas
  • Terraces & balconies over unoccupied spaces
  • Countertops
  • Facades
  • Steam rooms (when used in conjunction with a vapour barrier)

HYDRO BAN® Adhesive & Sealant

HYDRO BAN Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant. This product is specifically formulated to meet today’s Green Building Standards and has excellent adhesion on a wide variety of substrates.

  • Excellent adhesion on nearly ALL substrates including polystyrene
  • Fast Cure
  • Excellent Durability
  • Superior Flexibility
  • Will NOT shrink or crack
  • NO harmful components
  • VOC Compliant
  • Contains no solvents or isocyanates
[RIGHTPANE]
© 2012 LATICRETE Australia Pty Ltd.   All trademarks shown are the intellectual properties of their respective owners.  Terms Of Use  Privacy Statement